Pencarian Artikel Jurnal & Majalah

Menampilkan keseluruhan arsip dokumen (Halaman 137 dari 34194, Total: 341939 data)

Speed of Sound Measurement Using an Ultrasonic Motion Detector

Nama Pengarang : -
Nama Majalah/Jurnal : The Physics Teacher
Volume / Nomor Edisi : 60 (No. 7)
Nomor Halaman : 597–599
Abstraksi Narasi : We propose a method to measure the speed of sound in air using a motion detector. The experiment is based on the principle of a motion detector used to measure distances. This device measures the time of flight of alternating ultrasonic waves between the observer and the target. By assuming a fixed speed of sound, the time of flight can be converted into a distance. The medium, including its temperature through which the sound travels, influences the speed of sound. A motion detector has been used to show the effect of CO2 concentration on the resulting distance measurement, and to estimate the linear change in speed of sound per degree Celsius. The distance measurement using a motion detector has to be calibrated according to the medium’s condition. The Logger Pro 3 features allow adjustment of the temperature setting and addition of an offset value to correct the motion detector reading.

A High-Speed Test of the Equivalence Principle

Nama Pengarang : Hollis Williams
Nama Majalah/Jurnal : The Physics Teacher
Volume / Nomor Edisi : 60 (No. 7)
Nomor Halaman : 594–596
Abstraksi Narasi : It is well known that Newton’s work on mechanics depended in a crucial way on the previous observations of Galileo. The key insight of Galileo was that one can analyze the motion of bodies using experiments and mathematical equations. One experimental observation that roughly emerges from this work in modern terms is that two objects of different mass that are simultaneously released from rest and allowed to fall under the influence of gravity through a vacuum should hit the ground at the same time (this is essentially what is called the equivalence principle in general relativity). In popular legend, it is said that Galileo tested this by dropping two balls of different masses from the Leaning Tower of Pisa and showing that they hit the ground at the same time, but the historical evidence suggests that this is unlikely as he seems to have experimented mostly with balls rolling down inclined slopes.

Drawing the Light Paths at a Lens to Find Its Effective Focal Length and Principal Planes

Nama Pengarang : -
Nama Majalah/Jurnal : The Physics Teacher
Volume / Nomor Edisi : 60 (No. 7)
Nomor Halaman : 591–593
Abstraksi Narasi : This paper proposes a simple method to design experiments for drawing the light paths at a lens to find its effective focal length and principal planes. In the designed experiments, long-exposure photography was used to record the light scattered using a moving sheet of paper, thus revealing the light path. According to the proposed experimental method, (1) the effective focal length of a lens and (2) the principal planes of a lens can be measured. Moreover, the system is easy to build, inexpensive, and can promote students’ understanding of geometric optics by providing an intuitive physical phenomenon. The work is also of pedagogic interest as it reveals a new simple experimental method to find the principal planes of a thick lens and its effective focal length.

Carbon Nanodots in Beer and Cola: An Interesting Way to Introduce Nanomaterials and Their Applications

Nama Pengarang : -
Nama Majalah/Jurnal : The Physics Teacher
Volume / Nomor Edisi : 60 (No. 7)
Nomor Halaman : 588–590
Abstraksi Narasi : This article describes a simple way to introduce nanomaterials using the presence of carbon nanodots (CNDs) in widely available food. Budweiser® beer and Coca-Cola®, commercial foods that are commonly accessible, were utilized to demonstrate the optical property of nanoparticles. Specifically, green and violet laser pointers were employed for the observation of excitation-dependent photoluminescence of CNDs. To represent the application of CNDs, we obtained multiple-color emissions in onion cells that were imaged by using Budweiser beer and Coca-Cola as a dye. The demonstration could offer a perspective on the use of food in teaching nanomaterials at the high school and undergraduate levels.

Demonstration of Thermoelectric Power Generation with a Thermoelectric Cooler

Nama Pengarang : -
Nama Majalah/Jurnal : The Physics Teacher
Volume / Nomor Edisi : 60 (No. 7)
Nomor Halaman : 586–587
Abstraksi Narasi : In the present work, we demonstrate the phenomenon of temperature difference power generation, which is achieved by the reversible conversion between thermal and electrical energy.

Dynamic Energy Transfer Models

Nama Pengarang : -
Nama Majalah/Jurnal : The Physics Teacher
Volume / Nomor Edisi : 60 (No. 7)
Nomor Halaman : 583–585
Abstraksi Narasi : Energy is a disciplinary core idea and a cross-cutting concept in the K-12 Framework for Science Education and the Next Generation Science Standards (NGSS). As numerous authors point out, the energy model in these standards emphasizes the connections between energy and systems. Using energy ideas to interpret or make sense of phenomena means tracking transfers of energy across systems (including objects and fields) as phenomena unfold. To support students in progressing towards this goal, numerous representations—both static and dynamic—that describe the flow of energy across systems exist. Static representations work well to describe phenomena where the flow of energy is unidirectional and the dynamics are not a focus but struggle to represent circular energy flows and the temporal order of complex, dynamic phenomena. Existing dynamic representations like Energy Theater are usually qualitative, i.e., they represent energy in ways that differentiate between larger or smaller rates of transfer but do not provide a more detailed quantitative picture. In this article, we present how an existing, empirically tested, static representation called Energy Transfer Model (ETM) can be turned into a dynamic representation that is quantitatively accurate using the freely available 3D animation programming environment GlowScript (https://www.glowscript.org). To do so, we first summarize the central ideas in a model of energy that emphasizes the idea of energy transfer between systems, and we describe how the ETM represents those ideas. Then, we introduce the dynamic ETM and explain how it goes beyond the limitations of its static counterpart and how its quantitative accuracy adds to existing dynamic representations. Lastly, we discuss how the dynamic ETM can be used to integrate computational thinking into the physics classroom.

Online Radiation Experiment on Gamma-Ray Absorption from an Early Quack Device

Nama Pengarang : -
Nama Majalah/Jurnal : The Physics Teacher
Volume / Nomor Edisi : 60 (No. 7)
Nomor Halaman : 578–582
Abstraksi Narasi : Using a Geiger–Müller tube, sound-capturing software, and a simple computer program, students measured to reasonable precision the half-value layer of steel in absorbing high-energy gamma rays from a Radium Ore Revigator (pronounced re-vig-a-tor with the accent on “vig”), an early quack medical device. This article describes the process used for conducting online radiation exposure experiments as part of an in-class Course-Based Undergraduate Research Experience (CURE) project, with their instructor acting in a more subservient role carrying out actions requested by the students. The manner in which this student-centered approach can drive similar online radiation experiments without compromising student safety is discussed.

Online Course on Quantum Physics: Reading Primary Sources with Secondary School Students

Nama Pengarang : -
Nama Majalah/Jurnal : The Physics Teacher
Volume / Nomor Edisi : 60 (No. 7)
Nomor Halaman : 572–577
Abstraksi Narasi : Quantum physics is the basis for many technologies that are a fundamental part of our daily lives (e.g., lasers) or that may become so in the future (e.g., quantum cryptography and quantum computing). Because of this, quantum physics is now a central aspect of many countries’ secondary school curricula. In this article, we present the design and structure of an online secondary school course for synchronous learning on the historical development of quantum physics and its modern applications. With this online course entitled “Reading Club Quantum Physics: From the Beginnings to Modern Quantum Technologies,” we want to provide teachers with an individually usable resource for reading parts of quantum physics pioneers’ original publications together with their students. For this purpose, we have didactically prepared selected articles with publication dates from 1901 to 2019 and enriched them in this course (consisting of a total of seven chapters) with various work materials. Interested teachers can access our course, without charge, for their own and their students’ use by sending an email to the corresponding author.

FPAT—A Framework for Facilitating the Teaching and Learning of Using Fermi Problems Originating in Mathematics Education Research

Nama Pengarang : -
Nama Majalah/Jurnal : The Physics Teacher
Volume / Nomor Edisi : 60 (No. 7)
Nomor Halaman : 569–571
Abstraksi Narasi : Enrico Fermi is remembered for his many contributions to theoretical and experimental physics, but from an educational point of view he also popularized the use of the kind of questions we now call “Fermi problems” (or “Fermi questions”). Fermi problems (FPs) are back-of-envelope problems that arose from the need to make order of magnitude calculations, and Fermi himself used them in his own research and physics classes. The procedure proposed by Fermi was to break the original problem down into simpler sub-problems, solve these by making reasonable estimates and educated guesses, and thereby reach a solution to the original question. In the literature, this way of working is known as the “Fermi (estimates) method.”

In Service of Equity: 3D-Printed Models in University Introductory Physics

Nama Pengarang : -
Nama Majalah/Jurnal : The Physics Teacher
Volume / Nomor Edisi : 60 (No. 7)
Nomor Halaman : 565–568
Abstraksi Narasi : One of the central tenets of Universal Design for Learning (UDL) is the presentation of concepts using multiple modalities. As new technologies develop, the variety of available representations increases as well. In this paper, we explore how 3D-printed models can provide another avenue of approach to physics concepts. Students with low vision may particularly benefit from such models.
← Kembali ke Halaman Utama