| Nama Pengarang | : | Hammar Ilham Akbar, Muhammad Ilham Arbi Atmaja, Eko Surojo, Bambang Kusharjananta, Reza Aldiansyah Fanani |
| Nama Majalah/Jurnal | : | Mekanika: Majalah Ilmiah Mekanika |
| Volume / Nomor Edisi | : | 23 (No. 1) |
| Nomor Halaman | : | 33-40 |
| Abstraksi Narasi | : | Aluminium matrix composite is a composite material that can be used as reinforcement to increase the tribological properties of composite. The process of manufacturing the Al6061-Sea sand composite used the stir casting method with stirring time of 10 minutes and speed of 600 rpm. Stir casting specimens were manufactured with height dimension of 20 mm and diameter of 10 mm. After that, the specimen was friction tested using the pin on disc method. The highest coefficient of friction was the specimen without electroless coating with the addition of 2 wt% Mg of 0.634. The more mass fraction of sea sand, the higher the porosity, and the lower the density. An electroless coating process can be carried out on reinforcing particles. This study aims to determine the effect of addition of Mg and treatment of reinforcing particles on the Al6061-Sea sand composite on the coefficient of friction and wear rate. The coefficient of friction, the specimen density increased, the porosity and the wear rate, decreased. This occurred because the reinforcement particle size of sea sand bonded strongly to aluminium matrix. The highest coefficient of friction was the electroless coating with the addition of 2 wt% Mg of sea sand, which was 0.646. |
| Nama Pengarang | : | Ilham Bagus Wiranto, Sherly Octavia Saraswati, Iqbal Reza Alfikri, Chairunnisa Chairunnisa, Fadli Cahya Megawanto, Muhammad Ilham Adhynugraha, Nur Cholis Majid |
| Nama Majalah/Jurnal | : | Mekanika: Majalah Ilmiah Mekanika |
| Volume / Nomor Edisi | : | 23 (No. 1) |
| Nomor Halaman | : | 22-32 |
| Abstraksi Narasi | : | In this study, a dynamic impact loading using Finite Element Analyses (FEA) was applied to an Unmanned Aerial Vehicle (UAV) composite skin panel. Two types of boundary condition panels were investigated (Fixed and Pinned). The composite UAV skin panel consists of upper panel and stiffener which have a thickness of 3 mm and 2 mm, respectively. The material properties used in this study was referring to Hexcel W3G282-F593 technical data sheet. A hemispherical steel indenter with 70 mm diameter and 120 kg of mass was used to crush the panel with a velocity of 4.43 m/s. The finite element analyses were performed using dynamic explicit solver in ABAQUS 6.23. At the beginning of study, the mesh convergence study was conducted to choose the proper mesh for main analysis. The convergence study was simulated using 20 kg mass to shorten computational time. The mesh size of 10 mm was chosen for the main analysis due to convergent result and short computational time compared to others mesh size. The impact deformation, contact force-displacement plot, and contact force-time plot was used to show the differences of using those boundary condition. The results show that fixed and pinned boundary condition reaches its contact force peak with the value of 29.2 kN and 22.8 kN, respectively. |
| Nama Pengarang | : | M. Fajar Lazuardy, Muhammad Fakhruddin |
| Nama Majalah/Jurnal | : | Mekanika: Majalah Ilmiah Mekanika |
| Volume / Nomor Edisi | : | 23 (No. 1) |
| Nomor Halaman | : | 12-21 |
| Abstraksi Narasi | : | Laminated Glass Fiber Reinforced Polymer (GFRP) composites are widely used in various industries, such as boat building, car bodies, water tanks and pipelines, which in their use sometimes have the potential to be exposed to impact loads, especially in transportation equipment. Therefore, it is necessary to perform an impact test to determine the toughness value of a composite material against impact loads. This study aims to investigate the characteristics of fibreglass Woven Roving (WR)/polyester composites produced by the compression moulding process to determine the toughness of the composite material concerning changes in weave size. This research uses variations of glass fibre woven roving in sizes of 200 gsm, 400 gsm, 600 gsm. The impact test was conducted following the American Society for Testing Materials (ASTM) D6110-10. The impact test result showed that the lowest impact strength is found in a composite with a woven size of 200 gsm, which is 0.145 J/mm2, and the highest impact strength is found in composite with a woven size of 600 gsm, which is 0.280 J/mm2. |
| Nama Pengarang | : | Abid Paripurna Fuadi, Teguh Muttaqie, Andi Cahyo Prasetyo Tri Nugroho, Yudiawan Fajar Kusuma, Suherman Mukti, Mohammad Arif Kurniawan, Topan Firmandha, Muhammad Ismail |
| Nama Majalah/Jurnal | : | Mekanika: Majalah Ilmiah Mekanika |
| Volume / Nomor Edisi | : | 23 (No. 1) |
| Nomor Halaman | : | 1-11 |
| Abstraksi Narasi | : | Indonesian maritime security and law enforcement rely frequently on Patrol boats. However, collisions can occur during the operation, leading to potential loss of life, damage to the ship, and environmental harm. In preventing such incidents, the government needs to strengthen the patrol boats against collisions in accordance with class rules and regulations in Indonesia.The COLL notation is an additional notation for vessel collision protection, which specifies the required strength of the vessel's hull and structural components to minimize the risk of damage and reduce the consequences of a collision. This study highlights the key areas that require strengthening, including the vessel’s bow, stern, and hull, as well as the propulsion system that needs to be considered in the design stage. The addition of collision bulkheads, increasing the hull plating thickness, and reinforcing the engine mounts and shafting are also necessary to ensure the vessel's safety against collision. In conclusion, strengthening patrol boats against a collision with COLL notation based on class rules and regulations in Indonesia is one of the methods available that can be applied for the design stage to increase the level of operational safety of patrol boats. |
| Nama Pengarang | : | Kendhawati, L., & Purba, F. D. |
| Nama Majalah/Jurnal | : | Jurnal Psikologi |
| Volume / Nomor Edisi | : | 46 (No. 1) |
| Nomor Halaman | : | 106-115 |
| Abstraksi Narasi | : | Marriage is proven to be related to health and well-being of those involved in it. However, the status of marriage is not the most important, but how the quality of the marriage is the key to its positive effects. This study aims to examine a relationship between marital quality with happiness and life satisfaction. Data collection was conducted on 189 participants who have married with less than five years, said to be a critical period, which are living in the city of Bandung. The marital quality was measured using the Quality Marriage Index/QMI (6 items; α= .91), happiness was measured using the Happiness Thermometer at three time points (3 items; α= .83), and life satisfaction was measured using the Self-Anchoring Cantril Striving Scale at three time points (3 items; α= .47). The Spearman correlation test found that there was a significant positive relationship between the marital quality and happiness at three time points: today (rs= 0.431), last month (rs= 0.409), and throughout life (rs= 0.415) and life satisfaction at two time points: now (rs= 0.460) and next five years (rs= 0.281). In addition, life satisfaction of five years ago when subjects were still single was reported to be significantly lower compare to their life satisfaction this moment and predicted five years from now (p<0.001). These findings suggest that married couple giving more attention to improving the quality of their marriage relationship in order to be happier and satisfied with their life. |
| Nama Pengarang | : | Firmansyah, M. R., Amelia, R., Jamil, R. A., Faturochman, F., & Minza, W. M. |
| Nama Majalah/Jurnal | : | Jurnal Psikologi |
| Volume / Nomor Edisi | : | 46 (No. 1) |
| Nomor Halaman | : | 91-105 |
| Abstraksi Narasi | : | Personal variables are often assumed to affect trust. In Indonesia, there are three personal variables that affect trust: benevolence, competence, and integrity. This study aims to examine the influence of these three variables on friendship relationships. The respondents of this study consists of 220 students of Universitas Gadjah Mada (44.1% male and 55.9% female). Data were collected using the Trust Scale (α = .74), the Benevolence Scale (α = .85), the Competence Scale (α = .80), and the Integrity Scale (α = .78). Regression analysis revealed that competence has no significant influence towards trust, and the role of benevolence is greater than integrity. Based on these findings we constructed regression models with benevolence as the main variable and integrity as an additional variable. As a single factor, the contribution of benevolence is 21.4%. The addition of integrity in the regression model finds that the contribution of both variables together is 29.2%. |
| Nama Pengarang | : | Ratnaningsih, I. Z., & Prasetyo, A. R. |
| Nama Majalah/Jurnal | : | Jurnal Psikologi |
| Volume / Nomor Edisi | : | 46 (No. 1) |
| Nomor Halaman | : | 82-90 |
| Abstraksi Narasi | : | Correctional officers encounter vulnerable working conditions that may cause psychological discomfort at work. This study aims to determine the role of work-family balance, and quality of life to happiness at work in female correctional officers. The subjects in this study were 87 female correctional officers from three correctional institutions in Semarang and Malang. The age of subjects ranged from 22 - 57 years (Mage = 41.80); and the work period of the subjects ranged from 3-34 years (Mtenure = 18.80). The sampling technique used was convenience sampling. Instruments that used for data collection were demographic data questionnaires, Work-Family Balance Scale (32 items; α = .898), WHOQOL-BREF Scale (26 items; α = .906), and Happiness at Work Scale (22 items; α = .801). Data analysis using multiple regression analysis show there a positive and significant correlation between work-family balance and happiness at work (r = .613; p <.001), there was a positive and significant correlation between quality of life and work happiness (r = .394; p <.001), furthermore work-family balance and quality of life together can predict happiness at work in female correctional officers (r = .633; R2 = .401; F = 28.115; p <.001). Work-family balance and quality of life effectively contributed 39.7% to predicting happiness at work in female correctional officers. |
| Nama Pengarang | : | Utomo, H. B., Suminar, D. R., Hamidah, H., & Yulianto, D. |
| Nama Majalah/Jurnal | : | Jurnal Psikologi |
| Volume / Nomor Edisi | : | 46 (No. 1) |
| Nomor Halaman | : | 69-81 |
| Abstraksi Narasi | : | This study specifically aims to analyze the contribution of need satisfaction for autonomy, need satisfaction for competence, and need satisfaction for relatedness that is associated with teacher teaching motivation. The participants of this study were 84 early childhood education programs teachers in Kediri Regency and Tulungagung Regency (100% women, Mage = 31.71 years; SD = 8.86). Data were collected using the Basic Need Satisfaction in General Scale and the Autonomous Motivation for Teaching Questionnaire presented in Indonesian language. Data analysis in this study used descriptive statistical techniques and Pearson correlation technique. The results shows that there is no significant correlation between need satisfaction for autonomy with teaching motivation (r= .043; p = .585), there is significant correlation between need satisfaction for relatedness with teaching motivation (r= .208; p = .008), and there is significant correlation between need satisfaction for competence with teaching motivation (r= .167; p = .031). Understanding teaching motivation based on self-determination may help teachers in disadvantaged areas to improve and recognize self-potential, so that teachers can develop themselves by optimizing need satisfaction as a factor that influences the teacher's activities in teaching. |
| Nama Pengarang | : | Ermida Simanjuntak, Fajrianthi Fajrianthi, Urip Purwono |
| Nama Majalah/Jurnal | : | Jurnal Psikologi |
| Volume / Nomor Edisi | : | 46 (No. 1) |
| Nomor Halaman | : | 55-68 |
| Abstraksi Narasi | : | Cyberslacking in the educational context is defined as using internet in the classrooms for non-academic purpose during lectures. One of student cyberslacking scale was developed by Akbulut, Dursun, Dönmez, & Sahin through researches towards Turkey undergraduate students. This scale consists of items to measure non-academic internet access activities during lectures. Those activities are sharing, shopping, real time updating, accessing online content and gaming/ gambling. This study aims to adopt the Cyberslacking Scale of Akbulut dkk. in the context of undergraduate Indonesian students. Subjects for adopting this scale are 46 male and 156 female undergraduate university students (N=202) with age range between 18-23 years. Second order confirmatory factor analysis (CFA) was conducted to analyze this scale. The results showed that dimension of sharing, shopping, real time updating, accesing online content, and gaming/gambling dimension are positively represented cyberslacking construct. Thus the cyberslacking scale can be used in Indonesian educational context. |
| Nama Pengarang | : | Prihatsanti, U., Fajriyanthi, F., & Purwono, U. |
| Nama Majalah/Jurnal | : | Jurnal Psikologi |
| Volume / Nomor Edisi | : | 46 (No. 1) |
| Nomor Halaman | : | 41-54 |
| Abstraksi Narasi | : | Voice as a form of constructive expression in improving organizational functions and effectiveness has received great attention, especially in studies that explain the antecedents and consequences of employees’ voices. However, studies that explain psychometric properties of employee voice measurements are still limited. This article aimed to examine the psychometric properties, particularly construct validity, of employee voice measurement. In Study 1, three employee voice instruments were found through literature review from 23 articles in the last five years (2013-2018) from EBSCOhost and Proquest databases. In Study 2, based on the results of the literature review, the sound psychometric property test was carried out using confirmatory factor analysis. The results of data analysis prove that the Employee Voice scale of Liang, Farh, and Farh (2012) is an appropriate model for measuring employee voices with good validity and reliability. |