Pencarian Artikel Jurnal & Majalah

Menampilkan keseluruhan arsip dokumen (Halaman 718 dari 34197, Total: 341964 data)

VLSI for digital television

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 83-7, JULY (No. 7)
Nomor Halaman : 1055-1070
Abstraksi Narasi : The paper provides an overview of the current status in the industry of digitized television including techniques used and their limitations, technological concerns and design methodologies needed to achieve the goals for highly integrated systems. A multiresolution scalable generic HDTV codec based on subband coding is presented, proving the feasibility of VLSI for true HDTV frequency. In addition, a VLSI design methodology is proposed based on programmable processor macrofunctions optimized for the huge amount of data to be processed. The goal was to integrate general VLSI implementation aspects in a specific digital codec system to validate the design methodology for high speed multimedia applications. Digital TV functions can be optimized for encoding and decoding in the same conceptual process and be implemented in silicon in a mole dedicated way using a kind of automated custom design approach allowing enough flexibility.

Digital video recording

Nama Pengarang : M. Umemoto
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 83-7, JULY (No. 7)
Nomor Halaman : 1044-1054
Abstraksi Narasi : Through mutual technology transfer between consumer and professional video recorders, the last 20 years has witnessed a rapid evolution from analog to digital recording. Each new digital videotape recorder (VTR) uses different channel coding. This implies that improving the recording density involves the development of new channel-coding schemes together with evolutionary magnetic tapes and heads. As a result, professional digital VTR's offer the best features for video recording. This paper reviews state-of-the-art magnetic recording devices, signal processing techniques for digital recording. It also describes the specifications for home-use digital recorders for current television systems, and discusses disk recording technology in the future.

Cameras and display systems

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 83-7, JULY (No. 7)
Nomor Halaman : 1032-1043
Abstraksi Narasi : We first discuss the position of cameras and displays in digital television systems. It is difficult to realize these devices in digital form so cameras and displays will remain analog for some time, even after television signal processing is implemented digitally. Nevertheless, the importance of camera and display in television systems will not diminish. These devices will always be key elements in the human interface. Second, we describe the current state of the art and future trends in camera and display technology. In addition to providing an overview of the charge coupled device (CCD), we discuss the digital technologies used in a CCD camera. We also provide an overview of currently available displays-CRT's, flat panel displays, projection displays, and head-mounted displays (HMD's)-and discuss future possible lines of research. Finally, we discuss camera and display technology as applied to digital television systems, including the use of these devices in a multimedia environment.

Digital actors for interactive television

Nama Pengarang : N. Magnenat Thalmann
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 83-7, JULY (No. 7)
Nomor Halaman : 1022-1031
Abstraksi Narasi : In this paper, we define the concept of digital actors and show their importance in the future interactive digital television and multimedia. We discuss the applications of these digital actors in the new multimedia services especially for training and education. We summarize the main techniques to create and control these digital actors and emphasize the importance to develop new tools for the control and the autonomy of these actors. An integrated and functional system for the animation of digital actors is presented. In particular, we describe the integration of motion control techniques, autonomy based on synthetic sensors and facial communication.

Present status of three-dimensional television research

Nama Pengarang : T. Motoki
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 83-7, JULY (No. 7)
Nomor Halaman : 1009-1021
Abstraksi Narasi : Television that conveys real-time information has become an indispensable part of our lives. Its technology has advanced from the days of black-and-white sets to color models and to high-definition television (HDTV). HDTV has been contrived to provide the audience with greater immediate appeal such as sensation of reality and power than the current TV system does and its worldwide applications are expected to continue to grow. Real world information which we obtain with our eyes is three-dimensional. It is reasonable therefore, that we humans want an imaging system that produces pictures that are as natural and real as things we see and experience every day. Three-dimensional television (3DTV) is a very promising approach expected to satisfy such wishes. As television technology matures and HDTV produces pictures as clear as movies, 3DTV is now capable of providing real-time stereoscopic pictures with high resolution. This paper outlines the studies that have been carried out about 3DTV as a post-HDTV system. The themes of the paper are focused to such topics as human factors in relation to binocular parallax, camera and display systems, and bandwidth reduction technology.

Batteries for low power electronics

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 83-4, APRIL (No. 4)
Nomor Halaman : 687-693
Abstraksi Narasi : Progress in battery technology is closely tied to that in electronics, however, it is slow in comparison. Growth in new systems once in production, is also slow, depending upon the development of new devices which need their performance characteristics. This has been true, in particular for lithium cells operating at 3 V. Older electrochemical systems such as C-Zn, alkaline, Zn-air, NiCd, and lead-acid continue to get better, and maintain the market for devices which can use them. Primary lithium batteries are growing in use as new devices are designed around their higher voltage and superior shelf life. The Li-MnO/sub 2/ system dominates the commercial marker. At least 16 manufacturers produce many sizes and configurations from high rate "D" cells to 50 mAh thin, flat cells. Two new secondary (rechargeable) systems, nickel-metal hydride and lithium ion, have recently been introduced They are growing at a rapid rate in response to environmental concerns and the need for higher energy density. Other secondary systems such as Zn-air and lithium-polymer electrolyte are nearing commercial production. Environmental regulations continue to impact battery use and disposal, leading to more interest in secondary systems which can be reused many times before disposal. Mercury has largely been banned from use in primary batteries, both as a corrosion inhibitor for zinc and as a cathode in the mercuric oxide cell. Existing and emerging battery systems are discussed in terms of energy content, shelf and cycle life and other characteristics.

Trends and limits in the "Talk times" of personal communicators

Nama Pengarang : C.W. Warwick
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 83-4, APRIL (No. 4)
Nomor Halaman : 681-686
Abstraksi Narasi : In the past, telecommunications and computing have only been possible within a few feet from a telephone jack or an AC outlet. The user interface has required hand-eye coordination, full user attention, and a working surface to operate, for example, a telephone keypad a keyboard or a mouse. Now, "personal communicators" with wireless connectivity, energy efficient electronics novel user interfaces, and advanced battery technology promise to cut these tethers, and to offer convenient and natural communication and computation anytime, anywhere. This article provides simple estimates for the energy budget for personal communicators and its evolution as technology matures. In outline, we assume personal communicators will mimic the size and weight of successful, portable objects, such as paper notebooks. From the weight, the fraction of the weight devoted to batteries, and the specific energy of modern rechargeable batteries, we estimate the energy available. Since it is desirable for this energy to last a full working day of heavy use, one can estimate the average power the communicator will draw. Observation of people using computers and telephones gives us a typical "usage profile" describing the time spent viewing the display, computing, and/or communicating. The functionality required in each mode lends us to an estimate of the power drawn in each mode, and its trend in time. Thus human-machine interfaces will become increasingly natural and attractive.

Portable video on demand in wireless communication

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 83-4, APRIL (No. 4)
Nomor Halaman : 659-680
Abstraksi Narasi : Our present ability to work with video has been confined to a wired environment, requiring both the video encoder and decoder to be physically connected to a power supply and a wired communication link. This paper describes an integrated approach to the design of a portable video-on-demand system capable of delivering high-quality image and video data in a wireless communication environment. The discussion will focus on both the algorithm and circuit design techniques developed for implementing a low-power video compression/decompression system at power levels that are two orders of magnitude below existing solutions. This low-power video compression system not only provides a compression efficiency similar to industry standards, but also maintains a high degree of error tolerance to guard against transmission errors often encountered in wireless communication. The required power reduction can best be attained through reformulating compression algorithms for energy conservation. We developed an intra-frame compression algorithm that requires minimal computation energy in its hardware implementations.

Technology directions for portable computers

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 83-4, APRIL (No. 4)
Nomor Halaman : 636-658
Abstraksi Narasi : This paper contains an evaluation of trends in the key system parameters (e.g., size, weight, function, performance, battery life) for battery-powered portable computers, together with a review of development trends in the technologies required for such systems. The discussion focuses on notebook-size portable computers. Those technologies which will have substantial impact on battery life and power budgets of future notebook computers receive the primary emphasis in this paper for example, liquid crystal displays, storage technology, wireless communication technology, and low power electronics. System power management is also be addressed. The basic theme of this paper is first to develop a view of what the key attributes of future notebook computers will be, and then to discuss how technologies must evolve to allow such systems to be advanced over the current state of the art in terms of portability and battery life.

Low power microelectronics: retrospect and prospect

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 83-4, APRIL (No. 4)
Nomor Halaman : 619-635
Abstraksi Narasi : The era of low power microelectronics began with the invention of the transistor in the late 1940's and came of age with the invention of the integrated circuit in the late 1950's. Historically, the most demanding applications of low power microelectronics have been battery operated products such as wrist watches, hearing aids, implantable cardiac pacemakers, pocket calculators, pagers, cellular telephones and prospectively the hand-held multi-media terminal However, in the early 1990's low power microelectronics rapidly evolved from a substantial tributary to the mainstream of microelectronics. The principal reasons for this transformation were the increasing packing density of transistors and increasing clock frequencies of CMOS microchips pushing heat removal and power distribution to the forefront of the problems confronting the advance of microelectronics. The distinctive thesis of this discussion is that future opportunities for low power gigascale integration (GSI) will be governed by a hierarchy of theoretical and practical limits whose levels can be codified as: (1) fundamental, (2) material, (3) device, (4) circuit, and (5) system.
← Kembali ke Halaman Utama