| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | - |
| Volume / Nomor Edisi | : | 103 (No. 12) |
| Nomor Halaman | : | 2355-2380 |
| Abstraksi Narasi | : | The concept of an all-electric ship, while offering unprecedented advantages from the point of view of efficiency and flexibility of operation, has introduced new challenges in terms of stability and power flow control. The advent of a full power electronics power system has raised new questions from the point of view of system dynamics, particularly when dealing with the new medium-voltage direct current distribution. The overall goal of guaranteeing a secure operation of the power system has brought researchers to consider two main approaches: reducing the dynamics of the large load to operate in a range of dynamics compatible with traditional generation systems, or making the generator set smarter through its power electronics interface. This paper compares these approaches to stable operation, focusing on the latter considered more in line with the progress of technology and in general more appealing. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | - |
| Volume / Nomor Edisi | : | 103 (No. 12) |
| Nomor Halaman | : | 2344-2354 |
| Abstraksi Narasi | : | Modern technology combined with the desire to minimize the size and weight of a ship's power system are leading to renewed interest in more electric or all-electric ships. An important characteristic of the emerging ship power system is an increasing level of load variability, with some future pulsed loads requiring peak power in excess of the available steady-state power. This inevitably leads to the need for some additional energy storage beyond that inherent in the fuel. With the current and evolving technology, it appears that storage will be in the form of batteries, rotating machines, and capacitors. All of these are in use on ships today and all have enjoyed significant technological improvements over the last decade. Moreover, all are expected to be further enhanced by today's materials research. A key benefit of storage is that, when it can be justified for a given load, it can have additional beneficial uses such as ride-through capability to restart a gas turbine if there is an unanticipated power loss; alternatively, storage can be used to stabilize the power grid when switching large loads. Knowing when to stage gas turbine utilization versus energy storage is a key subject in this article. The clear need for storage has raised the opportunity to design a comprehensive storage system, sometimes called an energy magazine, that can combine intermittent generation as well as any or all of the other storage technologies to provide a smaller, lighter and better performing system than would individual storage solutions for each potential application. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 106 (No. 11) |
| Nomor Halaman | : | 2056-2067 |
| Abstraksi Narasi | : | This paper introduces current research on automatic performance tuning, specifically in the Japanese community, from two aspects. First, we discuss autotuning (AT) research from the viewpoint of AT frameworks, including AT methodology, computer languages, and performance models. In addition, target algorithms and applications of AT research are discussed, along with their functions. Then, we focus on the fast Fourier transform (FFT) as a major topic in the applications of adaptable and effective AT technologies and present state-of-the-art algorithms for advanced multicore architectures. An AT methodology for the FFT algorithm is also discussed. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | - |
| Volume / Nomor Edisi | : | 103 (No. 12) |
| Nomor Halaman | : | 2333-2343 |
| Abstraksi Narasi | : | Three motors that were developed for icebreakers epitomize the history of electric propulsion motor development in Japan. Direct current (dc) motors were developed for Fuji, commissioned in 1965, and Shirase I, commissioned in 1982, and induction motors were developed for Shirase II, commissioned in 2009. Three separate groups in Japan are actively developing superconducting motors for marine propulsion. The Tokyo University of Marine Science and Technology group developed the world's first axial-gap coreless high-temperature superconducting motor (HTS) with a 100-kW output for a liquid neon thermosiphon cooled superconducting machine over a period from 2004 to 2007. The IHI Corporation group has developed four types of axial-type HTS motors since 2004. Using a cooling system based on liquid nitrogen, they achieved the world's highest output at 365 kW in 2007. The Kawasaki Heavy Industries group has been developing radial-type HTS motors since 2007. In 2010, the group developed a 1-MW motor that achieved an output of 450 kW. In 2013, the group also developed a 3-MW motor that achieved an output of 3 MW. Furthermore, the group has developed key hardware technologies for a 20-MW motor. |
| Nama Pengarang | : | Pippin, Sonja... [et.al.] |
| Nama Majalah/Jurnal | : | - |
| Volume / Nomor Edisi | : | 103 (No. 12) |
| Nomor Halaman | : | 2320-2332 |
| Abstraksi Narasi | : | Electric propulsion of ships has experienced steady expansion for several decades. Since the early 20th century, icebreakers have employed the flexibility and easy control of direct current (dc) motors to provide for ship operations that split ice with back and forth motion of the ship. More recently, cruise ships have employed diesel-electric propulsion systems to take advantage of the flexibility of diesel, as opposed to steam engines, and because the electric plant can also be used for hotel loads. Research vessels, ferries, tankers, and special purpose vessels have also taken advantage of increased flexibility and fuel efficiency with electric propulsion. Today, the U.S. Navy is building an “all electric” destroyer to be named “Zumwalt,” which employs two induction motors for propulsion. There are several different classes of motors that might be considered for use in ship propulsion, ranging from dc (commutator) motors through conventional induction and synchronous motors to permanent magnet synchronous machines, doubly fed machines and superconducting alternating current (ac) and acyclic homopolar machines. This review paper describes features of some of the major classes of motor that might be used in ship propulsion. |
| Nama Pengarang | : | Narain Hingorani |
| Nama Majalah/Jurnal | : | - |
| Volume / Nomor Edisi | : | 103 (No. 12) |
| Nomor Halaman | : | 2312-2319 |
| Abstraksi Narasi | : | When the control functions of various types of power electronics systems are examined, a significant degree of common functionality emerges, irrespective of the target application. It is possible to define hierarchical control architectures for these systems using common interface definitions between control system divisions or layers. Such definitions enable the use of common designs for multiple applications and the use of commercially available electronics and communications modules allowing cost reduction in power electronics applications. This paper presents various partitioning strategies of a hierarchical control architecture for use in high power electronics control systems and defines various parameters/functions that need to be handled within each layer, and those that need to be communicated between the layers. Each layer has characteristic processing and communication speed requirements, irrespective of the final applications. |
| Nama Pengarang | : | Sajad Saeedi |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 106 (No. 11) |
| Nomor Halaman | : | 2020-2039 |
| Abstraksi Narasi | : | Visual understanding of 3-D environments in real time, at low power, is a huge computational challenge. Often referred to as simultaneous localization and mapping (SLAM), it is central to applications spanning domestic and industrial robotics, autonomous vehicles, and virtual and augmented reality. This paper describes the results of a major research effort to assemble the algorithms, architectures, tools, and systems software needed to enable delivery of SLAM, by supporting applications specialists in selecting and configuring the appropriate algorithm and the appropriate hardware, and compilation pathway, to meet their performance, accuracy, and energy consumption goals. The major contributions we present are: 1) tools and methodology for systematic quantitative evaluation of SLAM algorithms; 2) automated, machine-learning-guided exploration of the algorithmic and implementation design space with respect to multiple objectives; 3) end-to-end simulation tools to enable optimization of heterogeneous, accelerated architectures for the specific algorithmic requirements of the various SLAM algorithmic approaches; and 4) tools for delivering, where appropriate, accelerated, adaptive SLAM solutions in a managed, JIT-compiled, adaptive runtime context. |
| Nama Pengarang | : | Antono, Hery |
| Nama Majalah/Jurnal | : | - |
| Volume / Nomor Edisi | : | 103 (No. 12) |
| Nomor Halaman | : | 2285-2311 |
| Abstraksi Narasi | : | This paper presents some of the key advances in power electronics pertaining to shipboard electric power system applications. The focus is on the emerging wide bandgap semiconductor devices, i.e., silicon carbide (SiC) and gallium nitride (GaN) devices, and their potential impact on future shipboard power conversion and drives. Their benefits on power converter efficiency and power density are explained through a case study of a medium-voltage (MV) class motor drive system. SiC and GaN also enable new applications, including solid-state transformers, while posing new design and application challenges such as gate drive, protection, and interaction with loads. In addition to device related topics, this paper also overviews other important advances in power electronics, including topology, control, passive components, thermal management, filters, and packaging. The significance of power electronics building blocks (PEBBs) concept for shipboard power system development is discussed. Recognizing the growing complexity of shipboard power systems, some system-level technologies related to future MV direct current (dc) system architecture are highlighted. |
| Nama Pengarang | : | Timothy J. McCoy |
| Nama Majalah/Jurnal | : | - |
| Volume / Nomor Edisi | : | 103 (No. 12) |
| Nomor Halaman | : | 2276-2284 |
| Abstraksi Narasi | : | Selection of power and propulsion system architecture is one of the most far-reaching and irreversible decisions made by the designer of a modern ship. However, most texts and design handbooks pay little attention to the implications of this design decision nor is sufficient attention paid to the attributes of the various alternatives available to the ship designer/owner. Integrated power systems, made possible over the past three decades by the advances in modern high-power power electronics, provide many benefits to the ship owner, including reduced operating costs, arrangement flexibility, superior reliability and survivability, and support for advanced weapons on sensors warships. This paper will outline the architecture options available to today's ship designer and will discuss the design implications and pitfalls inherent in the power system architecture selection, paying particular attention to the unique aspects of integrated power systems. |
| Nama Pengarang | : | Dwight Alexander |
| Nama Majalah/Jurnal | : | - |
| Volume / Nomor Edisi | : | 103 (No. 12) |
| Nomor Halaman | : | 2267-2275 |
| Abstraksi Narasi | : | This paper presents an overview of the development and present state of the art of hybrid propulsion drive systems as applied to high-performance naval combatants. Motivations for implementing hybrid electric drive architectures are reviewed including potential benefits in term of fuel savings/reduced emissions and additional power generation capacity. Both back-fit into existing propulsion and power generation architectures as well as forward-fit are discussed. Issues associated with coupling the mechanical drive train and electric power generation system together are reviewed. |