Pencarian Artikel Jurnal & Majalah

Menampilkan keseluruhan arsip dokumen (Halaman 741 dari 34197, Total: 341964 data)

Software Support Inside and Outside Solid-State Devices for High Performance and High Efficiency

Nama Pengarang : Wu, Chengyu,Yang, Jiaqing
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 105 (No. 9)
Nomor Halaman : 1650-1665
Abstraksi Narasi : In the past decade, flash memory has been in the spotlight across a variety of research communities from circuits to computer systems, and significant progress has been accomplished. This has enabled flash memory to become increasingly pervasive across the entire information technology infrastructure, from consumer electronics to cloud and supercomputing. This paper aims to provide a comprehensive survey on the important advancements and milestones in the domains across flash translation layer (FTL), operating systems, and applications. As the storage device hardware has been quickly commoditized, software becomes increasingly important to tap the potential of flash memory to its full extent. Therefore, a comprehensive survey with a focus on software aspects will be very valuable to the research community and industry. It is our hope that this survey paper will serve as a good reference for system practitioners and researchers.

Array Architectures for 3D NAND Flash Memories

Nama Pengarang : Rino Micheloni
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 105 (No. 9)
Nomor Halaman : 1634-1649
Abstraksi Narasi : NAND Flash memories have changed and keep changing our lives. In the past two decades, NAND-based systems, in the form of Flash cards and USB keys, have replaced films and floppy disks. But disruption did not stop there. Today, NAND is really ubiquitous, as it plays the role of storage element inside smartphones and tablets; even further, it is now expanding its reach because solid-state drives (SSDs), i.e., drives built with several NAND devices, are replacing hard disk drives (HDDs) in more and more applications. To fuel this continuous evolution, NAND has to remain very aggressive in terms of cost per bit. When approaching 10-nm technologies, planar NAND is running out of steam: industry and academia have worked hard on finding a solution to this problem for more than a decade. Three-dimensional integration turned out to be the most promising alternative, and it is now eventually reaching the market. This paper is about 3-D NAND Flash memories and the related integration challenges. Charge trap and floating gate 3-D technologies will be discussed with the aid of several bird's-eye views. Advanced layout techniques will thoroughly be analyzed. Finally, future scaling trends will be presented.

A Survey on MIMO Transmission With Finite Input Signals: Technical Challenges, Advances, and Future Trends

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 106 (No. 10)
Nomor Halaman : 1779-1833
Abstraksi Narasi : Multiple antennas have played an essential role in spatial multiplexing and diversity transmission for a wide range of communication applications. Most advances in the design of high-speed wireless multiple-input-multiple-output (MIMO) systems have been based on information-theoretic principles that demonstrate how to efficiently transmit signals conforming to Gaussian distribution. However, although the Gaussian signal is capacity-achieving, practical systems transmit signals belonging to finite and discrete constellations. Therefore, capacity-achieving transceiver processing based on a Gaussian input signal can be quite suboptimal for practical MIMO systems with discrete constellation input signals. To address this shortcoming, this paper aims to provide a comprehensive overview of MIMO transmission design with finite input signals. It first summarizes existing fundamental results for MIMO systems with finite input signals. Next, focusing on basic point-to-point MIMO systems, it examines transmission schemes based on the three most important criteria for communication systems: mutual-information-driven designs, mean-square-error-driven designs, and diversity-driven designs. In particular, a unified framework is developed for the design of low-complexity transmission schemes applicable to massive MIMO systems in forthcoming 5G wireless networks for the first time. Furthermore, adaptive transmission designs are proposed that switch among these criteria based on channel conditions to formulate the best transmission strategy. A survey is then given of transmission designs with finite input signals for multiuser MIMO scenarios, including MIMO uplink transmission, MIMO downlink transmission, MIMO interference channel, and MIMO wiretap channel. Additionally, transmission designs with finite input signals are discussed for other multi-antenna systems. Finally, a number of technical challenges that remain unresolved at the time of writing are highlighted, and future trends...

Reviewing the Evolution of the NAND Flash Technology

Nama Pengarang : Emanuel Boputra
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 105 (No. 9)
Nomor Halaman : 1609-1633
Abstraksi Narasi : This paper reviews the recent historical trends of the NAND Flash technology, highlighting the evolution of its main parameters and explaining what allowed it to become not only the most important integrated solution for nonvolatile storage of high volumes of data but also a strong rival eroding the market share of hard-disk drives. The scaling trend followed by planar arrays will be discussed with close attention, along with the major physical constraints impacting the performance and the reliability of modern deca-nanometer technologies. This will make clear why the development of further planar nodes with feature size below ~15 nm, representing today's state of the art, can be considered less favorable than turning all the efforts toward the integration of 3-D arrays. The most promising 3-D architectures will then be reviewed, discussing their benefits and issues and addressing the impact of the change of the integration paradigm from the standpoint of the major NAND applications.

Solid-State Drives: Memory Driven Design Methodologies for Optimal Performance

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 105 (No. 9)
Nomor Halaman : 1589-1608
Abstraksi Narasi : Solid-state drives (SSDs) faced an astonishing development in the last few years, becoming the cornerstone to new paradigms and markets of the information technology, such as cloud computing and big data centers. So far, the SSD design approach has focused on the optimization of the Flash translation layer, the firmware devoted to fulfill the compatibility with traditional hard-disk drives. For hyperscaled SSDs this strategy is no longer valid since their performance and reliability are strictly linked to that of the NAND Flash memories that constitute the storage medium, in particular when the multilevel cell paradigm is considered. For this reason, the design flow must follow a bottom-up approach that, starting from an accurate knowledge of the time and use dependent reliability of the NAND Flash memories, selects the most appropriate error correction strategy to extend the SSD lifetime while reducing its performance degradation. Then, the design flow moves to that of the SSD controller and of the interface toward the host where the application is running. This paper will thoroughly discuss this bottom-up approach, and finally, it will show how it is possible to leverage new approaches, such as the software-defined storage system that, by exploiting a hardware/software codesign of the SSD controller architecture and of the host application, will be able to revolutionize the traditional computer/memory interaction.

Solid-State Drives

Nama Pengarang : Rino Micheloni
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 105 (No. 9)
Nomor Halaman : 1586-1588
Abstraksi Narasi : The articles in this special issue cover all the most recent advances in the solid-state drive field from both hardware and software/firmware perspectives. If we look at the DRAM history, DRAM data access speeds have increased at a faster rate than HDDs. The gap in read and write performances between DRAM and HDD has widened in the last years, leaving an opportunity for a new intermediate memory/storage technology between HDDs and DRAM: nand Flash-based SSDs can fill this performance gap, thus profoundly changing the traditional memory hierarchy below the microprocessor.

Spatial technology and social media in remote sensing: challenges and opportunities

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 105 (No. 9)
Nomor Halaman : 1583-1585
Abstraksi Narasi : The convergence of remote sensing technologies with social media, coupled with advances in other location-aware technologies such as WiFi and smartphones, is moving us on a fast track to a situation in which we can readily know, at any time, where everybody and everything are located on the surface of the Earth, and to exploit the power of social media in different contexts. Remote sensing technology involves the use of systems and algorithms to record information about the surface of the Earth from a remote location [1]. Although reliable as a data source, remote sensing data may not always be available. However, these data can be complemented by other sources of data, such as geographic information systems (GIS) and social media [2], in order to address time-critical applications. For instance, relating publicly available social media information with remote sensing or GIS data can lead to a more efficient management of emergency response (which refers to applications in which real/near-real-time response is needed, such as natural disasters). Social media are now playing a more relevant role in our daily lives and provide a unique opportunity to gain valuable insight on information flow and social networking within the society. As a result, the integration of social media data with other consolidated technologies such as remote sensing or GIS is of great importance.

History of the Endoscope

Nama Pengarang : Piet C. De Groen
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 105 (No. 10)
Nomor Halaman : 1987-1995
Abstraksi Narasi : Endoscopy is a technique allowing inspection, manipulation, and treatment of internal organs using devices to enhance visualization from a distance of the target organs without the need of an incision large enough to allow the hand or fingers of the surgeon to enter the surgical field. As can be expected, endoscopy developed in areas where hollow organs were connected to the exterior via natural orifices: the urethra, the vagina, the rectum, the ear canal, and the throat and pharynx. Entry of natural orifices was safe, devoid of wounds, and thus with little risk of infection and death. As also can be expected in the early days without radio, TV, telephone, or internet, numerous physicians and nonphysician scientists invented smaller or larger contributions to the field, sometimes at the same time unaware of the inventions of others. Not all who contributed published their inventions or the application of their inventions, and for others records were lost or destroyed at times of war. As a result the history of the endoscope is not an exact science where each advancement can be placed on a reputable time line and assigned with confidence to a single inventor. The limited space assigned to this summary of the history of the endoscope will not allow any details or nuances; instead it will focus on a number of well-regarded and generally accepted important contributions and its inventors in the early phases of endoscopy and mostly on the technology of the more recent history of endoscopy (Table 1). In addition, rather than focus on the people behind the inventions, this history is aimed mostly at the engineering concepts and subsequent applications in the medical field. For those who desire a more detailed and nuanced history of endoscopy, the reader is referred to books, manuscripts, and websites that cover the entire field or specific subspecialty areas: there are many including cystoscopy, colposcopy, bronchoscopy, thoracoscopy, gastrointestinal endoscopy, laparoscopy, arthroscopy, laryngoscopy, and otoscopy

Geotagging Text Content With Language Models and Feature Mining

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 105 (No. 10)
Nomor Halaman : 1971-1986
Abstraksi Narasi : The large-scale availability of user-generated content in social media platforms has recently opened up new possibilities for studying and understanding the geospatial aspects of real-world phenomena and events. Yet, the large majority of user-generated content lacks proper geographic information (in the form of latitude and longitude coordinates). As a result, the problem of multimedia geotagging, i.e., extracting location information from user-generated text items when this is not explicitly available, has attracted increasing research interest. Here, we present a highly accurate geotagging approach for estimating the locations alluded by text annotations based on refined language models that are learned from massive corpora of social media annotations. We further explore the impact of different feature selection and weighting techniques on the performance of the approach. In terms of evaluation, we employ a large benchmark collection from the MediaEval Placing Task over several years. We demonstrate the consistently superior geotagging accuracy and low median distance error of the proposed approach using various data sets and comparing it against a number of state-of-the-art systems.

Spatial Event Forecasting in Social Media With Geographically Hierarchical Regularization

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 105 (No. 10)
Nomor Halaman : 1953-1970
Abstraksi Narasi : Social media has been utilized as a significant surrogate for spatial societal event forecasting. The accuracy and discernibility of a spatial event forecasting model are two key concerns, as they determine how accurate and how detailed the model's predictions will be. Existing research focuses almost exclusively on the accuracy alone, seldom considering the accuracy and discernibility simultaneously because this would require a considerably more sophisticated model while suffering from several challenges, namely: 1) the precise formulation of the tradeoff between accuracy and discernibility; 2) the scarcity of social media data with a high spatial resolution; and 3) the characterization of spatial correlation and heterogeneity. This paper proposes a novel feature learning framework that concurrently addresses all the above challenges by formulating prediction tasks for different locations with different spatial resolutions, allowing the heterogeneous relationships among the tasks to be characterized. This characterization is then integrated into our new models based on multitask learning, with parameters optimized by our proposed algorithm based on the alternative direction method of multipliers (ADMM) and dynamic programming. Extensive experimental evaluations performed on several data sets from different domains demonstrated the effectiveness of our proposed approach.
← Kembali ke Halaman Utama