| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 107 (No. 6) |
| Nomor Halaman | : | 977-1010 |
| Abstraksi Narasi | : | Many industrial systems have specific requirements derived from the applications they execute. Specifically, the interaction of a distributed embedded control system (DECS) with the real-world imposes strict real-time (RT) and reliability requirements. For a system to be RT, it has to produce a proper result in a bounded time. On top of that, for a system to be reliable, it has to operate continuously during its mission time, and in cases in which very high reliability is needed, fault tolerance (FT) techniques are used. Moreover, these systems are often deployed in dynamic environments where the operational conditions may change in an unpredictable manner. Therefore, there is an increasing interest in creating DECSs that are capable of modifying their behavior autonomously and dynamically in response to unexpectedly changing requirements or conditions. In recent years, there is a growing trend toward using Ethernet as the network technology for DECSs. Unfortunately, the original specification of this technology lacks appropriate services to fulfill the most demanding requirements of industrial systems. In this regard, many Ethernet-based protocols and standards have been proposed along the past years to deal with these limitations. In this paper, we survey solutions that have been proposed to achieve FT in Ethernet-based DECSs, considering faults both in their nodes and communication subsystem. In addition, we discuss adaptive FT techniques that can be used to increase the flexibility of adaptive DECS. Finally, we identify future trends and open challenges to build highly reliable DECS in the future. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 107 (No. 6) |
| Nomor Halaman | : | 962-976 |
| Abstraksi Narasi | : | In factory automation (FA) and process control, networks and protocols of the operation technology are more and more merged with those of the information technology (IT). The requirements of operational technology (OT) and IT are different. Modern networks and protocols for communication in FA and process control systems must take care of the coexistence and convergence between the IT and OT worlds. Due to historical developments, the standards for OT were and remain defined by the International Electrical Commission. The IT, on the other hand, is the domain of the International Telecommunication Union and the International Standard Organization (ISO), which takes over most of the standards in the communication field from the IEEE Standard groups 802. This paper provides an overview of the standardization bodies involved and provides examples on how different requirements introduced by OT and IT can coexist. The merging of OT and IT on an Ethernet network with time-sensitive networking is the key technology for real-time applications in the factory floor. The adoption of the industrial protocol OPC UA provides secure connections from the factory floor to automation cloud infrastructures. IO-Link wireless, as new standard for sensors and actuators in OT, provides coexistence mechanisms toward wireless standards in IT applications such as IEEE 802.11. These examples show that there are possibilities to coexist and even to merge the standards and technologies of OT and IT in a successful way. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 107 (No. 6) |
| Nomor Halaman | : | 944-961 |
| Abstraksi Narasi | : | Industrial communication systems represent one of the most important innovations of the last decades in the context of factory and process automation systems. They are networks specifically designed to cope with the tight requirements of these challenging application fields such as real time, determinism, and reliability. Moreover, industrial networks are often deployed in environments characterized by strong electromagnetic interference, mechanical stress, critical temperature, and humidity. Over the last three decades, different classes of industrial networks have been developed according to changing requirements and available communication and information technologies. In this paper, we first provide an account of the state of the art, reviewing classical fieldbuses, real-time Ethernet networks, and industrial wireless networks, along with their most relevant features, applications, and performance figures. We introduce the complex standardization framework and analyze the market status and assumptions for future development. In the second part, we address the future perspectives focusing on new technologies, standards, and fields of application. In particular, we consider the time-sensitive networking (TSN) family of standards, Industrial Internet-of-Things (IIoT) systems, high-performance wireless LANs, industrial applications of cellular networks, and Ethernet networks for automotive communication. |
| Nama Pengarang | : | Tadashi Nakano |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 107 (No. 7) |
| Nomor Halaman | : | 1442-1456 |
| Abstraksi Narasi | : | This paper provides a comprehensive review of the emerging research area of mobile molecular communication. In mobile molecular communication, sender and receiver bionanomachines as well as associated nodes in the environment exhibit dynamic behavior in the sense that they are mobile and communicate while they move. This paper presents a model of mobile bionanomachines and uses the model to discuss how groups of such bionanomachines working in unison can provide useful functionalities. This paper illustrates several functionalities by applying mobile molecular communication to the concept of cooperative drug delivery. Unsolved research challenges in this area are outlined and discussed. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 107 (No. 7) |
| Nomor Halaman | : | 1425-1441 |
| Abstraksi Narasi | : | Disease-affected nervous systems exhibit anatomical or physiological impairments that degrade processing, transfer, storage, and retrieval of neural information, leading to physical or intellectual disabilities. Brain implants may potentially promote clinical means for detecting and treating neurological symptoms by establishing direct communication between the nervous and artificial systems. Current technology can modify the neural function at the supracellular level as in Parkinson's disease, epilepsy, and depression. However, recent advances in nanotechnology, nanomaterials, and molecular communications have the potential to enable brain implants to preserve the neural function at the subcellular level, which could increase effectiveness, decrease energy consumption, and make the leadless devices chargeable from outside the body or by utilizing the body's own energy sources. In this paper, we focus on understanding the principles of elemental processes in synapses to enable diagnosis and treatment of brain diseases with pathological conditions using biomimetic synaptically interactive brain-machine interfaces (BMIs). First, we provide an overview of the synaptic communication system, followed by an outline of brain diseases that promote dysfunction in the synaptic communication system. Then, we discuss the technologies for brain implants and propose future directions for the design and fabrication of cognitive BMIs. The overarching goal of this paper is to summarize the status of engineering research at the interface between the technology and the nervous system and direct the ongoing research toward the point where synaptically interactive BMIs can be embedded in the nervous system. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 107 (No. 7) |
| Nomor Halaman | : | 1402-1424 |
| Abstraksi Narasi | : | Biology is well known for its ability to communicate through molecularly specific signaling modalities and a globally acting electrical modality associated with ion flow across biological membranes. Emerging research suggests that biology uses a third type of communication modality associated with a “flow” of electrons through reduction/oxidation (redox) reactions. This redox signaling modality appears to act globally and has features of both molecular and electrical modalities: since free electrons do not exist in aqueous solution, the electrons must “flow” through molecular intermediates that can be switched between two states-with electrons (reduced) or without electrons (oxidized). Importantly, this global redox modality is easily accessible through its electrical features using convenient electrochemical instrumentation. In this review, we explain this redox modality, describe our electrochemical measurements, and provide four examples demonstrating that redox enables communication between biology and electronics. The first two examples illustrate how redox probing can acquire biologically relevant information. The last two examples illustrate how redox inputs can transduce biologically relevant transitions for patterning and the induction of a synthetic biology (synbio) “transceiver” for two-hop molecular communication. In summary, we believe redox provides a unique ability to bridge biodevice communication because simple electrochemical methods enable global access to biologically meaningful information. Furthermore, we envision that redox may facilitate the application of information theory to the biological sciences. |
| Nama Pengarang | : | Josep Miquel Jornet |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 107 (No. 7) |
| Nomor Halaman | : | 1387-1401 |
| Abstraksi Narasi | : | The development of optical nano-bio interfaces is a fundamental step toward connecting biological networks and traditional electronic computing systems. Compared to conventional chemical and electrical nano-bio interfaces, the use of light as a mediator enables new type of interfaces with unprecedented spatial and temporal resolutions. In this paper, the state of the art and future research directions in optogenomic interfaces are discussed. Optogenomic interfaces are light-mediated nano-bio interfaces that allow the control of the genome, i.e., the genes and their interactions in the cell nucleus (and, thus, of all the cell functionalities) with (sub) cellular resolution and high temporal accuracy. Given its fundamental role in the process of cell development, the study is focused on the interactions with the fibroblast growth factor receptor 1 (FGFR1) gene and the integrative nuclear FGFR1 signaling (INFS) module in stem cells and in neuronal cells, whose control opens the door to transformative applications, including reconstructive medicine and cancer therapy. Three stages of optogenomic interfaces are described, ranging from already experimentally validated interfaces activating broad cellular responses and expressing individual genes to more advanced interfaces able to regulate and correct DNA topology, chromatin structure, and cellular development. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 107 (No. 7) |
| Nomor Halaman | : | 1369-1386 |
| Abstraksi Narasi | : | The ability of cells to sense and respond to their environment is encoded in biomolecular reaction networks, in which information travels through processes such as production, modification, and removal of biomolecules. Recent advances in biotechnology have made it possible to reengineer these physical processes to the point where synthetic biomolecular circuits can be inserted into cells to program cell behavior for useful functionalities. These circuits are often designed in a bottom-up fashion with smaller components connected to form complex systems. In a bottom-up approach to design, it is highly desirable that circuit components behave modularly, that is, the input-output behavior of a module characterized in isolation remains unchanged when the context changes. Unfortunately, due to the physical processes by which information is communicated from one biomolecular circuit module to the other, the lack of modularity is often a problem. In fact, the input-output behavior of a module depends on both direct connectivity to other modules, due to loading effects, and indirect connectivity arising from loads applied to shared cellular resources. In this paper, we summarize the published work illustrating how the means of molecular communication lead to these problems. Specifically, we review the concept of retroactivity, which has been proposed to capture loading problems within a “signals and systems” framework, allowing for engineering solutions that restore modularity. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 107 (No. 7) |
| Nomor Halaman | : | 1356-1368 |
| Abstraksi Narasi | : | Most digital electronic circuits utilize a timing reference to synchronize the progression of signals and enable sequential memory elements. These designs may not be realizable in biological substrates due to the lack of a reliable high-frequency clock signal. Asynchronous designs eliminate the need for a clock with data encodings and request/acknowledge handshake protocols. This paper proposes a workflow to automate the design of asynchronous genetic circuits. This workflow extends genetic design tools by leveraging asynchronous logic design methods customized for this technology. This workflow is demonstrated on a genetic sensor that uses filtering and cellular communication to improve its reliability. |
| Nama Pengarang | : | Christopher Rose |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 107 (No. 7) |
| Nomor Halaman | : | 1342-1355 |
| Abstraksi Narasi | : | Recent years have shown a rapid increase in the amount of study devoted to communication systems where molecules are information carriers. The reasons for such interest are varied, from seeking to understand the ubiquity of molecular communication in biology to the search for communication methods in media where electromagnetic and acoustic methods are inappropriate, to exploring the energy efficiency of methods where some delivery latency can be allowed. With this tutorial on recent discrete molecular communication research, we seek to organize the work into broad categories and thence under the umbrella of what can be called “inscribed matter communication,” where information is conveyed through assemblage, release, and capture of matter as opposed to the transmission of photons or phonons. We will begin by considering discrete passage of molecules between senders and receivers, and argue that matter emission and detection, even at Avogadrian levels, are a subset of the discrete problem, all with a focus on point-to-point communication. In this way, we hope to contextualize current work within a larger fundamental framework, illuminate the hard boundaries of what is known, and then stimulate further research on this fascinating topic. |