| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 110 (No. 9) |
| Nomor Halaman | : | 1339-1357 |
| Abstraksi Narasi | : | In a backscatter communication system, the backscatter device (BD) transmits its messages to the backscatter receiver (BR) by reflecting the incident signal from an external radio frequency (RF) emitter, instead of using power-hungry active RF components themselves. Thus, backscatter communication has shown great potential for achieving low-power communication. The double-fading effect associated with the backscatter link, however, is a major limiting factor to achieve efficient backscatter communication. Reconfigurable intelligent surfaces (RISs), a recently developed technology, can be applied at the BD to enhance the backscatter link thanks to the fact that both RIS and backscatter communication share the same reflective principle. Such a design can also allow the backscatter communication system to capture the desired RF signal as a reflective carrier in a complex radio environment. In this article, a comprehensive overview of backscatter communication assisted by RIS is given. We first introduce the basics of backscatter communication, which covers the antenna scattering principle, backscatter modulation, and link budget calculation. Then, the details of RIS are discussed, which include antenna-based RIS and metamaterial-based RIS, followed by the discussion of the roles of RIS in backscatter communication. After that, we provide an overview of three types of backscatter communication systems assisted by RIS, including RIS-assisted unmodulated backscatter communication, RIS-assisted ambient backscatter communication, and RIS-assisted symbiotic radio. Emerging applications of these systems, technical challenges, and future opportunities in this emerging field are also presented. |
| Nama Pengarang | : | A. Lee Swindlehurst |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 110 (No. 9) |
| Nomor Halaman | : | 1312-1338 |
| Abstraksi Narasi | : | Optimally extracting the advantages available from reconfigurable intelligent surfaces (RISs) in wireless communications systems requires estimation of the channels to and from the RIS. The process of determining these channels is complicated when the RIS is composed of passive elements without any sensing or data processing capabilities, and thus, the channels must be estimated indirectly by a noncolocated device, typically a controlling base station (BS). In this article, we examine channel estimation for passive RIS-based systems from a fundamental viewpoint. We study various possible channel models and the identifiability of the models as a function of the available pilot data and behavior of the RIS during training. In particular, we will consider situations with and without line-of-sight propagation, single-antenna and multi-antenna configurations for the users and BS, correlated and sparse channel models, single-carrier and wideband orthogonal frequency-division multiplexing (OFDM) scenarios, availability of direct links between the users and BS, exploitation of prior information, as well as a number of other special cases. We further conduct simulations of representative algorithms and comparisons of their performance for various channel models using the relevant Cramér-Rao bounds. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | The Physics Teacher |
| Volume / Nomor Edisi | : | 59 (No. 4) |
| Nomor Halaman | : | 258-259 |
| Abstraksi Narasi | : | Bell’s theorem is a topic of perennial fascination. Publishers and the general public have a steady appetite for approachable books about its implications. The scholarly literature includes many analogies to Bell’s theorem and simple derivations of Bell inequalities, and some of these simplified discussions are the basis of interactive web pages. Less well known is that the original Bell theorem is virtually unaffected when the calculus is taken away. Indeed, the only use of integrals in Bell’s derivation is to compute averages. We can simply replace integrals with the word “average.” The resulting proof of Bell’s theorem is just as easy to understand, and just as shocking, as the analogies designed to ease comprehension. |
| Nama Pengarang | : | Jie Huang |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 110 (No. 9) |
| Nomor Halaman | : | 1290-1311 |
| Abstraksi Narasi | : | Reconfigurable intelligent surfaces (RISs) are 2-D metasurfaces, which can intelligently manipulate electromagnetic waves by low-cost near passive reflecting elements. RIS is viewed as a potential key technology for the sixth-generation (6G) wireless communication systems mainly due to its advantages in tuning wireless signals, thus smartly controlling propagation environments. In this article, we aim at addressing channel characterization and modeling issues of RIS-assisted wireless communication systems. First, the concept, principle, and potential applications of RIS are given. An overview of RIS-based channel measurements and experiments is presented by classifying frequency bands, scenarios, system configurations, RIS constructions, experiment purposes, and channel observations. Then, RIS-based channel characteristics are studied, including reflection and transmission, the Doppler effect and multipath fading mitigation, channel reciprocity, channel hardening, rank improvement, far field, near field, and so on. RIS-based channel modeling works are investigated, including large-scale path loss models and small-scale multipath fading models. Finally, future research directions related to RIS-assisted channels are also discussed. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 110 (No. 9) |
| Nomor Halaman | : | 1266-1289 |
| Abstraksi Narasi | : | Reconfigurable intelligent surfaces (RISs) offer an entirely new route to alter the propagation properties of electromagnetic waves and thus control their reflection, refraction, and scattering features in arbitrary manners. Such physical attributes are perceived to bring about fundamental influence on the modern wireless communication system due to the possibilities to establish artificial and controllable propagation environments for radio signals, which no longer rely on the complex encoding, decoding, and other signal processing techniques. Recent studies reveal that the wave manipulation is not the only skill of the RISs. With the rapid developments of space–time digital metasurface and information metasurface, there has been increasing attention focused on the information manipulation via these artificial surfaces. In this article, we provide an overview of the theoretical models of the space–time digital metasurface and information metasurface, the mechanisms of wavefront shaping, and the signal modulations in space and time domains during the wave–matter interactions. We will also address some practical issues during implementations of the reconfigurable intelligent metasurfaces and the associated hardware architectures at microwave frequencies to realize simplified radio frequency transmitters. Several modulation schemes and the corresponding demonstration systems are introduced to illustrate the powerful abilities of the reconfigurable intelligent metasurfaces. Potential research directions of this technique are briefly discussed for their potential applications in future wireless networks. |
| Nama Pengarang | : | Arman Shojaeifard |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 110 (No. 9) |
| Nomor Halaman | : | 1244-1265 |
| Abstraksi Narasi | : | With massive deployment, multiple-input–multiple-output (MIMO) systems continue to take mobile communications to new heights, but the ever-increasing demands mean that there is a need to look beyond MIMO and pursue the next disruptive wireless technologies. Reconfigurable intelligent surface (RIS) is widely considered a key candidate technology block to provide the next generational leap. The first part of this article provides an updated overview of the conventional reflection-based RIS technology, which complements the existing literature to include active and semiactive RIS, and the synergies with cell-free massive MIMO (CF mMIMO). Then, we widen the scope to discuss the surface-wave-assisted RIS that represents a different design dimension in utilizing metasurface technologies. This goes beyond being a passive reflector and can use the surface as an intelligent propagation medium for superb radio propagation efficiency. The third part of this article turns the attention to the fluid antenna, a novel antenna technology that enables a diverse form of reconfigurability that can combine with RIS for ultrahigh capacity, power efficiency, and scalability. This article concludes with a discussion of the potential synergies that can be exploited between MIMO, RIS, and fluid antennas. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | The Physics Teacher |
| Volume / Nomor Edisi | : | 59 (No. 4) |
| Nomor Halaman | : | 253-256 |
| Abstraksi Narasi | : | Electromagnetism (E&M) is often challenging for students enrolled in introductory college-level physics courses. Compared to mechanics, the mathematics of E&M is more sophisticated and the representations are more abstract. Furthermore, students may lack productive intuitions they had with force and motion. In this article, we explore the mathematization of electric charge. Specifically, we explore how difficulties with positive and negative signs can arise for learners who approach integers primarily as positions on a number line. We discuss the nuances of electric charge as a physical quantity and situate it in a body of work by mathematics and physics education researchers to characterize the uses and meanings of signs. We then describe preliminary research that illustrates the effect of wording differences on student reasoning about electric charge as a signed quantity. Finally, we discuss implications for instruction. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 110 (No. 9) |
| Nomor Halaman | : | 1227-1243 |
| Abstraksi Narasi | : | The term “metasurface” (MTS) denotes an artificial surface constituted by a distribution of electrically small elements that collectively exhibit equivalent homogeneous boundary conditions (BCs) to an interacting electromagnetic field. MTSs are becoming increasingly popular due to the technological simplification that they offer with respect to volumetric metamaterials. In this article, we review the basic theory behind microwave MTSs seen as reconfigurable intelligent surfaces (RISs), oriented to the future visionary challenge of a smart radio environment. To this end, two different typologies of MTS are reviewed: surface-wave-based MTSs and nonspecular reflective MTSs. Both types can be effectively characterized using simplified problems that locally match the homogenized, modulated BCs. A different use of these problems allows for an accurate design of radiated and scattered fields. An accurate ray representation is also suggested, which allows for an effective description of the scattered field also in the Fresnel region and for the insertion of the MTS description in ray-tracing tools for network planning. Several examples of practical implementation are shown, and the challenges in applying electronic reconfigurability are discussed. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | The Physics Teacher |
| Volume / Nomor Edisi | : | 59 (No. 4) |
| Nomor Halaman | : | 250-252 |
| Abstraksi Narasi | : | In our first-semester introductory physics laboratory, we have an exercise on rotational dynamics. We have recently upgraded the equipment that we use in that exercise without changing the actual exercise. The new equipment has performed well so far, and we wanted to share what we did with others who may be looking for a relatively inexpensive way to outfit a laboratory on rotational dynamics. We will describe the physics of the exercise and what we ask our students to do. We will describe the components we purchased, what they cost, and how we assembled the apparatus. Finally, we will present some results from the exercise using the apparatus we built. |
| Nama Pengarang | : | - |
| Nama Majalah/Jurnal | : | Proceedings of the IEEE |
| Volume / Nomor Edisi | : | 110 (No. 9) |
| Nomor Halaman | : | 1210-1226 |
| Abstraksi Narasi | : | Reconfigurable intelligent surfaces (RISs) are gaining huge momentum in the field of wireless communications due to the paradigm shift that they bring. Indeed, they allow making any environment electromagnetically smart and dynamically reconfigurable for more efficient and greener wireless communications. As physicists, we proposed to use electronically tunable metasurfaces to shape the electromagnetic waves carrying our wireless communications in reflection almost ten years ago, inspired by some works that we and colleagues did in the field of wave control in complex media. In this article, we review the seminal works that led us to propose this concept, starting from the original one that is time reversal. Then, we propose a physicist’s point of view of RISs using a comparison with phase conjugation. Finally, we highlight what we think are their limitations, relying on both our knowledge of wave control and our study of them over a decade. |