Pencarian Artikel Jurnal & Majalah

Menampilkan keseluruhan arsip dokumen (Halaman 772 dari 34197, Total: 341964 data)

Weakly Coupled Multicore Fiber Technology, Deployment, and Systems

Nama Pengarang : Takashi Matsui
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 110 (No. 11)
Nomor Halaman : 1772-1785
Abstraksi Narasi : Space-division multiplexing (SDM) technology is a promising candidate to achieve massive parallelism in optical fiber cables and overcome the capacity limitation of the conventional single-mode fiber (SMF). Among the several kinds of SDM fiber, a weakly coupled multicore fiber (MCF) is advantageous in that it can be easily upgraded for use in existing equipment and requires no complex signal processing for optical multi-input multi-output (MIMO). In this article, we discuss the progress and standardization activity of MCF technologies from the viewpoint of accelerating the practical application of SDM technology. We first describe the possible application areas of SDM fibers and then show the recent progress of the essential technologies to construct the MCF link: the MCF itself, its splicing and connectorization, and the input/output techniques. We also discuss the availability and deployability of MCF as a large-capacity transmission medium and detail the progress on establishing a new international standard for SDM technology, which includes both historical progress and more recent endeavors on the standardization of optical fiber cables and SDM technology in International Telecommunication Union Telecommunication Standardization Sector (ITU-T) and International Electrotechnical Commission (IEC). We close with a summary of MCF technology and its standardization activity with an eye to next-generation transmission systems and the long-term development of ultralarge capacity SDM transmission technology.

Renewable Energy Integration in Diesel-Based Microgrids at the Canadian Arctic

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 107 (No. 9)
Nomor Halaman : 1838-1856
Abstraksi Narasi : The effect of climate change is significant in the arctic regions of the world, with the carbon footprint from diesel-only based electricity generation in remote arctic communities adding to the environmental degradation through greenhouse gas (GHG) emission, oil spills, and black carbon. Moreover, the dependence on diesel and its associated costs are an economic problem for these communities, particularly in the Canadian Arctic, where governments subsidize this fuel. Thus, this article presents specific studies including new variable-speed generator (VSG) technologies that demonstrate the feasibility, impact, and benefits of introducing renewable energy (RE) together with VSGs in remote microgrids in the Canadian Arctic. More specifically, this article describes a two-step procedure to select remote communities for detailed feasibility studies of deployment of RE sources, including a generation expansion planning (GEP) framework and optimization model for RE and new VSG integration applied to the selected communities, to minimize diesel dependence of isolated microgrids and maximize the incorporation of environmentally friendly generation technologies. The proposed approach is applied to communities in Nunavut and the North West Territories in the Canadian Arctic, based on actual data, to study the technoeconomic feasibility of RE integration and develop business cases for diesel generation replacement with RE and VSG generation in these communities. The obtained optimal plans contain diesel-RE hybrid combinations that would yield substantial economic savings and reductions on GHG emissions, which are being used as the base for actual deployments in some of the studied communities.

Lowering Electricity Access Barriers by Means of Participative Processes Applied to Microgrid Solutions: The Chilean Case

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 107 (No. 9)
Nomor Halaman : 1857-1871
Abstraksi Narasi : Many people across Latin America still do not have access to reliable electricity. Although Chile exhibits a comparatively high electricity coverage, many barriers are still present for the development of sustainable energy supply solutions exploiting local renewable energy sources. To face this challenge, a coconstruction methodology is proposed, which considers a flexible and participatory design with continuous communication between the technical team of the project and the community, thus ensuring informed decision making around the project design. In this context, microgrid-based solutions offer an ideal opportunity to exploit the integration of energy sources adapted to the specific local characteristics. The coconstruction methodology allows the identification of local requirements, less often considered for design procedures based on a traditional approach, in a joint work with the communities so that the technological solution is tailored for it. Consequently, different technical solutions (design adaptations and innovations) have been proposed and developed under this framework, such as: energy management systems, demand response strategies, microgrid applications for Mapuche communities, microformers, a monitoring system that includes social aspects, and vehicle to grid for microgrids. This paper summarizes the experience of several microgrid projects in Chile, identifies risks, impacts, control actions, and discusses their replicability to the Latin American and the Caribbean region.

Ultrahigh Fiber Count and High-Density Cables, Deployments, and Systems

Nama Pengarang : Davis, Elizabeth A.,Beyer, Carrie J.
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 110 (No. 11)
Nomor Halaman : 1760-1771
Abstraksi Narasi : Since the 1980s, the single-core optical fiber cable has been the essential data transmission wiring media, with ongoing increases in deployments. Its use case has broadened, with transmission distances ranging from meters to 10000s km, including intrabuilding, fiber-to-the-home (FTTH), terrestrial, and even submarine trunk lines. Currently, optical fiber cable deployment is strongly driven by cloud-based storage, X as a Service (XaaS), and worldwide data center (DC) functionality with the optical interconnection of massive servers on DC campuses. Hence, it is quite natural that the optical fiber cable industry has developed ultrahigh fiber count, high density, and small diameter optical fiber cable, e.g., 6912-fiber-count cable. With high-density cables, massive data capacity can be installed at one time while saving limited space in an underground duct. High-density cable designs have been developed not just by cable structure optimization but through the process of bundling fibers and the use of high-grade optical fibers. Moreover, many enabling technologies have been developed to support the deployment of ultrahigh fiber count cables, such as fiber identification, connectors, mass fusion splicing, and storage systems for fusion splicing points. In this article, state-of-the-art technologies and prospects for ultrahigh-count and ultrahigh-density optical fiber cables and enabling technologies are explained.

Optimal Electrification Planning Incorporating On- and Off-Grid Technologies: The Reference Electrification Model (REM)

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 107 (No. 9)
Nomor Halaman : 1872-1905
Abstraksi Narasi : In many parts of the world, access to basic electricity services remains a significant challenge. The status quo mode of electrification is central grid extension; however, in many areas, off-grid (OG) technologies like minigrids (MGs) and standalone (SA) systems are more suitable for promoting electricity access under cost constraints. Unfortunately, these opportunities are often overlooked due to the complexities of electrification planning, especially for large areas. Researchers have designed technoeconomic planning tools that can be scaled to cut through aspects of this complexity and be fit to address different places and contexts. This paper describes a computer-based optimization model - named the reference electrification model (REM) - which performs automatic electrification planning and is able to identify lowest cost system designs to most effectively provide desired levels of electricity access to populations of any given size. In doing so, REM determines the most suitable modes of electrification for each individual consumer by specifying whether customers should be electrified via grid extension, OG MGs, or SA systems. For each system, REM supplies detailed technical designs at the individual customer level. We have used this model in real planning activities in sub-Saharan Africa and South Asia. The description of REM's capabilities is supported by case examples. REM stands apart from other electrification planning models because of its high granularity and its capability to provide concrete plans for a wide range of geographical scales. Because of these benefits, REM has the potential to help rationalize electrification planning and expedite progress toward universal electricity access worldwide.

Devices and Fibers for Ultrawideband Optical Communications

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 110 (No. 11)
Nomor Halaman : 1742-1759
Abstraksi Narasi : Wavelength-division multiplexing (WDM) has historically enabled the increase in the capacity of optical systems by progressively populating the existing optical bandwidth of erbium-doped fiber amplifiers (EDFAs) in the C -band. Nowadays, the number of channels—needed in optical systems—is approaching the maximum capacity of standard C -band EDFAs. As a result, the industry worked on novel approaches, such as the use of multicore fibers, the extension of the available spectrum of the C -band EDFAs, and the development of transmission systems covering C - and L -bands and beyond. In the context of continuous traffic growth, ultrawideband (UWB) WDM transmission systems appear as a promising technology to leverage the bandwidth of already deployed optical fiber infrastructure and sustain the traffic demand for the years to come. Since the pioneering demonstrations of UWB transmission a few years ago, long strides have been taken toward UWB technologies. In this review article, we discuss how the most recent advances in the design and fabrication of enabling devices, such as lasers, amplifiers, optical switches, and modulators, have improved the performance of UWB systems, paving the way to turn research demonstrations into future products. In addition, we also report on the advances in UWB optical fibers, such as the recently introduced nested antiresonant nodeless fibers (NANFs), whose future implementations could potentially provide up to 300-nm-wide bandwidth at less than 0.2 dB/km loss.

Distributed Resources Shift Paradigms on Power System Design, Planning, and Operation: An Application of the GAP Model

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 107 (No. 9)
Nomor Halaman : 1906-1922
Abstraksi Narasi : Power systems have evolved following a century-old paradigm of planning and operating a grid based on large central generation plants connected to load centers through a transmission grid and distribution lines with radial flows. This paradigm is being challenged by the development and diffusion of modular generation and storage technologies. We use a novel approach to assess the sequencing and pacing of centralized, distributed, and off-grid electrification strategies by developing and employing the grid and access planning (GAP) model. GAP is a capacity expansion model to jointly assess operation and investment in utility-scale generation, transmission, distribution, and demand-side resources. This paper conceptually studies the investment and operation decisions for a power system with and without distributed resources. Contrary to the current practice, we find hybrid systems that pair grid connections with distributed energy resources (DERs) are the preferred mode of electricity supply for greenfield expansion under conservative reductions in photovoltaic panel (PV) and energy storage prices. We also find that when distributed PV and storage are employed in power system expansion, there are savings of 15%–20% mostly in capital deferment and reduced diesel use. Results show that enhanced financing mechanisms for DER PV and storage could enable 50%–60% of additional deployment and save 15 $/MWh in system costs. These results have important implications to reform current utility business models in developed power systems and to guide the development of electrification strategies in underdeveloped grids.

Ultrawideband Systems and Networks: Beyond C + L-Band

Nama Pengarang : Takeshi Hoshida
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 110 (No. 11)
Nomor Halaman : 1725-1741
Abstraksi Narasi : In the evolution of optical networks, spectral efficiency (SE) enhancement has been the most cost-efficient and thus the main driver for capacity increase for decades. As a result, the development of optical transport systems has been focused on the C - and L -bands, where silica optical fiber exhibits the lowest attenuation, and erbium-doped fiber amplifiers provide an efficient solution to compensate for the optical loss. With a gradual maturity in the SE growth, however, the extension of the optical bandwidth beyond the C+L -band is expected to play a significant role in future capacity upgrades of optical networks and, thus, attract increasing research interests. In this article, we discuss the merits and challenges of ultrawideband optical transport systems and networks beyond conventional bands.

Least-Cost Electrification Modeling and Planning—A Case Study for Five Nigerian Federal States

Nama Pengarang : -
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 107 (No. 9)
Nomor Halaman : 1923-1940
Abstraksi Narasi : Nigeria is the African country with the highest total number of people without access to electricity, at least 90 million. To provide sustainable and affordable energy to these people is an enormous challenge. Advanced modeling and planning are essential tools to enhance the quality of investment decisions. Planning has to address the latest electrification options [grid extension, hybrid minigrids, and solar home systems (SHS)] in a technically and economically sound way for different implementation phases. We have developed a modeling process to derive a least-cost electrification plan for five federal states in Nigeria combining energy system simulations with geospatial information system tools. Investments of approximately $1600 million for medium-voltage (MV) and low-voltage distribution infrastructure, minigrids, and smallscale systems are required to achieve a 100% electrification rate. The simulated electricity system of the five states is characterized by an overall load of about 1804 MW. The electrification options comprise different electrification measures. About 1772 MW are supplied by central power generation through the central grid via 11579-km new grid lines. The decentralized supply sources include only a few renewable energy (RE) minigrids with a total of 3-MW load will remain isolated, while all others will be interconnected to the central grid. The decentralized supply is defined by 225-MW photovoltaic (PV), 504-MWh battery, and 198-MW diesel-based isolated and interconnected minigrids as well as by 29-MW SHS capacities.

Flexible Technologies to Increase Optical Network Capacity

Nama Pengarang : Andrew Lord
Nama Majalah/Jurnal : Proceedings of the IEEE
Volume / Nomor Edisi : 110 (No. 11)
Nomor Halaman : 1714-1724
Abstraksi Narasi : Increased global traffic puts tough requirements not just on fiber communications links but on the entire network. This manifests itself in multiple ways, including how to optimize wavelength routing around the network, how to maximize the benefits arising from fine-control DSP with increasingly accurate real-time monitoring, and how to best deploy multiband or multiple fiber connectivity. This article will summarize research into all these areas to present a full picture of how future optical networks will play their role in supporting the continuing traffic demands of broadband, 5G, and associated applications.
← Kembali ke Halaman Utama